1980 Corvette Assembly Instruction Manual

1980 Corvette Assembly Instruction Manual Review

1980 Corvette Assembly Instruction Manual Feature

• Chevy Authorized reprint
• "On-line" notations intact
• Page numbers added
• Actual plant assembly manuals

1980 Corvette Assembly Instruction Manual Overview

This is a reprint of the actual assembly line manuals used on the Corvette assembly line! Reprinted courtesy of the Chevrolet Motor Division, these detailed manuals are a great reference. All 'on-line' notations remain in the manual to insure that all information is factory original and correct. Page numbers added Corvette Central #: 113042 Car years: 1980

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Sep 01, 2011 01:30:15

2 7/8" (73mm) Flex-Hone Cylinder Hone Tool 400 Grit (Silicon Carbide)

2 7/8" (73mm) Flex-Hone Cylinder Hone Tool 400 Grit (Silicon Carbide) Review

2 7/8" (73mm) Flex-Hone Cylinder Hone Tool 400 Grit (Silicon Carbide) Feature

• Flexible Cylinder Hone made of Silicon Carbide
• Hone is Made in USA by Brush Research Manufacturing
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill
• Perfect for bore honing and cylinder refinishing
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work)

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 30, 2011 21:18:13

OTC 6928 2-9/16" Round Hex Locknut Socket

OTC 6928 2-9/16" Round Hex Locknut Socket Review

OTC 6928 2-9/16" Round Hex Locknut Socket Feature

• Features a 1/2" square drive and can be used with an extension and torque wrench for accurate tightening
• Used on 1990-93 Dodge trucks with the Dana 60 manual hubs
• 2 9/16" hex locknut socket
• Weighs 1lb. 8oz
• Lifetime Marathon Warranty against defects in materials and workmanship

OTC 6928 2-9/16" Round Hex Locknut Socket Overview

These heavy-duty locknut sockets are a new addition to the OTC line of task Tamers. These are not light-hearted sockets. They feature a 1/2" square drive and can be used with an extension and torque wrench for accurate tightening. They are for use on rounded or standard hex nuts found on the most popular light-duty trucks on the road. Unlike the competition, these sockets are backed by the famous OTC Lifetime Marathon Warranty against defects in materials and workmanship. This 2 9/16" rounded hex locknut socket works on 1990-93 Dodge trucks with Dana 60 manual hubs.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 29, 2011 18:33:20

OTC 6928 2-9/16" Round Hex Locknut Socket

OTC 6928 2-9/16" Round Hex Locknut Socket Review

OTC 6928 2-9/16" Round Hex Locknut Socket Feature

• Features a 1/2" square drive and can be used with an extension and torque wrench for accurate tightening
• Used on 1990-93 Dodge trucks with the Dana 60 manual hubs
• 2 9/16" hex locknut socket
• Weighs 1lb. 8oz
• Lifetime Marathon Warranty against defects in materials and workmanship

OTC 6928 2-9/16" Round Hex Locknut Socket Overview

These heavy-duty locknut sockets are a new addition to the OTC line of task Tamers. These are not light-hearted sockets. They feature a 1/2" square drive and can be used with an extension and torque wrench for accurate tightening. They are for use on rounded or standard hex nuts found on the most popular light-duty trucks on the road. Unlike the competition, these sockets are backed by the famous OTC Lifetime Marathon Warranty against defects in materials and workmanship. This 2 9/16" rounded hex locknut socket works on 1990-93 Dodge trucks with Dana 60 manual hubs.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 28, 2011 14:34:00

Block Cylinder Flex-Hone - 4-1/8 In - 180 Grit

Block Cylinder Flex-Hone - 4-1/8 In - 180 Grit Review

Block Cylinder Flex-Hone - 4-1/8 In - 180 Grit Overview

4-1/8" Block Cylinder Flex-Hone - 180 GritFeatures: 13-1/2" overall length. A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures the Flex-Hone® to be self-centering, self-aligning to the bore, and self-compensating for wear.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 27, 2011 14:06:15

1" (25mm) Flex-Hone Cylinder Hone Tool 80 Grit (Silicon Carbide)

1" (25mm) Flex-Hone Cylinder Hone Tool 80 Grit (Silicon Carbide) Review

1" (25mm) Flex-Hone Cylinder Hone Tool 80 Grit (Silicon Carbide) Feature

• Flexible Cylinder Hone made of Silicon Carbide
• Hone is Made in USA by Brush Research Manufacturing
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill
• Perfect for bore honing and cylinder refinishing
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work)

1" (25mm) Flex-Hone Cylinder Hone Tool 80 Grit (Silicon Carbide) Overview

The Flex-Hone® tool is a surface refinishing tool that will is used to refinish and restore cylinder bores. The surface finish is dependant on the grit used. The tool is used for applications like engine rebuilding, hydraulic cylinders, brake rebuilding and general machining operations. Flex-Hone® Tool can be used with honing oil or engine oil. If honing hydraulic cylinders use the intended hydraulic fluid for the lubricant.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 26, 2011 11:27:12

2 3/4" (70mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

2 3/4" (70mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide) Review

2 3/4" (70mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide) Feature

• Flexible Cylinder Hone made of Silicon Carbide
• Hone is Made in USA by Brush Research Manufacturing
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill
• Perfect for bore honing and cylinder refinishing
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work)

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 25, 2011 04:03:20

Crushproof Tubing (CRU17AF475) Oval Tailpipe Adapter with Hook & Chain

Crushproof Tubing (CRU17AF475) Oval Tailpipe Adapter with Hook & Chain Review

Crushproof Tubing (CRU17AF475) Oval Tailpipe Adapter with Hook & Chain Feature

• Designed for easy adapting to all sorts of vehicle tailpipes
• Fits tailpipes up to 2-1/2" x 5-1/2"
• Manufactured to the Highest Quality Available.
• Meets the standard of excellence.
• Latest Technical Development.

Crushproof Tubing (CRU17AF475) Oval Tailpipe Adapter with Hook & Chain Overview

• Designed for easy adapting to all sorts of vehicle tailpipes
• Fits tailpipes up to 2-1/2" x 5-1/2"

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 23, 2011 12:12:15

Valve Lapping Compound

Valve Lapping Compound Review

Valve Lapping Compound Feature

• Silicone- carbide, grease -based compound
• Precise mating between valves and seats for fast cutting

Valve Lapping Compound Overview

Lapping Compound

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 22, 2011 11:23:04

OTC 6007 Lower Control Arm Prying Tool

OTC 6007 Lower Control Arm Prying Tool Review

OTC 6007 Lower Control Arm Prying Tool Feature

• Sold Individually

OTC 6007 Lower Control Arm Prying Tool Overview

Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and our OTC7420 or OTC7421 pry bar, it’s a one-person job.
 

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 21, 2011 07:45:21

Mastercool 85350 2.5" Gauge

Mastercool 85350 2.5" Gauge Review

Mastercool 85350 2.5" Gauge Feature

• Features a 2half inch 134A R-12 replacement gauge with heavy duty construction
• Includes anti-flutter feature that reduces needle fluctuation and increases reading accuracy
• Backed by a 1 year warranty on material and workmanship

Mastercool 85350 2.5" Gauge Overview

Mastercool 2.5" Gauge features a 21/2 inch 134A R-12 replacement gauge with heavy duty construction. Its anti-flutter feature reduces needle fluctuation and increases reading accuracy. This gauge compounds on the low side where silicone is dampened. It includes temperature or pressure readings and is backed by a 1 year warranty on material and workmanship.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 20, 2011 04:27:26

Rockwell Hardness Tester

Rockwell Hardness Tester Review

Rockwell Hardness Tester Feature

• Calculate Rockwell Hardness quickly and accurately
• Features a steel ball of precise weight and shape which is dropped from an exact height to yield and accurate Rc reading
• Check overheated or repaired crankshaft journals to confirm correct hardness
• Also use on flywheels
• 9-1/4" long, weights 4 oz., case and instructions included

Rockwell Hardness Tester Overview

Rockwell Hardness Tester Calculate Rockwell Hardness quickly and accurately. Features a steel ball of precise weight and shape which is dropped from an exact height to yield and accurate Rc reading. Check overheated or repaired crankshaft journals to confirm correct hardness. Also use on flywheels. 9-14" long. Weighs just 4 oz. Includes case and instructions.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 19, 2011 03:03:22

1 3/8" (35mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

1 3/8" (35mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide) Review

1 3/8" (35mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide) Feature

• Flexible Cylinder Hone made of Silicon Carbide
• Hone is Made in USA by Brush Research Manufacturing
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill
• Perfect for bore honing and cylinder refinishing
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work)

1 3/8" (35mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide) Overview

The Flex-Hone® tool is a surface refinishing tool that will is used to refinish and restore cylinder bores. The surface finish is dependant on the grit used. The tool is used for applications like engine rebuilding, hydraulic cylinders, brake rebuilding and general machining operations. Flex-Hone® Tool can be used with honing oil or engine oil. If honing hydraulic cylinders use the intended hydraulic fluid for the lubricant.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 18, 2011 00:12:57

OTC 7661 Caliper Hanger Set

OTC 7661 Caliper Hanger Set Review

OTC 7661 Caliper Hanger Set Feature

• Helps to prevent damage to the brake hose
• These hold the brake calipers out of the way

OTC 7661 Caliper Hanger Set Overview

The next time a job requires removing either front or rear disc brakes, these hangers will pay for themselves, in convenience alone. Any time there's brake, wheel bearing, axle shaft, or suspension service to do. These hangers hold the brake calipers out of the way, and at the same time, prevent damage to the brake hose.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 16, 2011 23:48:37

LISLE 13250

LISLE 13250 Review

LISLE 13250 Feature

• OIL PRES. SWITCH SOCKET

LISLE 13250 Overview

OIL PRES. SWITCH SOCKET

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 15, 2011 21:15:18

Lisle 35500 Rocker Oil Stoppers

Lisle 35500 Rocker Oil Stoppers Review

Lisle 35500 Rocker Oil Stoppers Feature

• Spring steel clips with gaskets stop splashing, squirting hot oil while you adjust clearance
• Designed for cars with hollow, oil-fed push rods
• Sixteen per set

Lisle 35500 Rocker Oil Stoppers Overview

Tired of making a mess and smoking up the shop when trying to adjust valve lash? Put these oil stoppers on to keep squirting oil from getting on the exhaust manifold or shop floor. Rocker Stoppers plug oil holes in ball-joint type rocker arms.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 14, 2011 21:03:21

Lisle 52700 Audio Stethoscope

Lisle 52700 Audio Stethoscope Review

Lisle 52700 Audio Stethoscope Feature

• Detects noise from vacuum leaks, exhaust leaks, wind noise and air leaks
• Comes in skin-pack
• For hard to reach locations, remove the funnel and use the hollow tube

Lisle 52700 Audio Stethoscope Overview

Place funnel over suspected air leak. Detects air induced sounds not detected by conventional stethoscopes. Detects noise from vacuum leaks, exhaust leaks, wind noise and air leaks. Comes in skin-pack.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 13, 2011 15:15:34

OTC 6503 Deluxe Double Flaring Tool Set with Cutter

OTC 6503 Deluxe Double Flaring Tool Set with Cutter Review

OTC 6503 Deluxe Double Flaring Tool Set with Cutter Feature

• Sold Individually

OTC 6503 Deluxe Double Flaring Tool Set with Cutter Overview

• Designed for steel brake lines where double flaring is required
• Also performs 45 angle single flares on 3/16", 1/4", 3/8", 7/16", 1/2" and 5/8" copper, aluminum, brass, and magnesium tubing
• Housed in a plastic blow molded case

Includes the OTC 6514 tubing cutter and adapters for double flaring 3/16", 1/4", 5/16", 3/8" and 1/2" tubing

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 12, 2011 12:00:26

2" (51mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide)

2" (51mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide) Review

2" (51mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide) Feature

• Flexible Cylinder Hone made of Silicon Carbide
• Hone is Made in USA by Brush Research Manufacturing
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill
• Perfect for bore honing and cylinder refinishing
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work)

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 11, 2011 10:51:14

2" (51mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide)

2" (51mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide) Review

2" (51mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide) Feature

• Flexible Cylinder Hone made of Silicon Carbide
• Hone is Made in USA by Brush Research Manufacturing
• Hone is self centering and can be used with 3/8" or 1/2" chuck drill
• Perfect for bore honing and cylinder refinishing
• The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work)

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 09, 2011 22:03:17

Proform 67605 GM LS Engine Valve Spring Compressor

Proform 67605 GM LS Engine Valve Spring Compressor Review

Proform 67605 GM LS Engine Valve Spring Compressor Overview

   Proform #67605 Valve Spring Compressor, Steel, Bolt Down Mount, for GM LS Engines, Each.  P75-67605   Description:This new LS1-LS6 valve spring compression tool from Proform Parts is the perfect example. It isn't fancy, but can cut valve spring removal and replacement time to under 1-hour. It will work on any LS engine in a Camaro, Firebird, Corvette or truck. And, it's guaranteed to get the job done as easy, if not easier, than expensive compression tools. This LS valve spring compressor is compact, is activated with normal hand tools and takes up almost no space in your toolbox.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 08, 2011 20:27:48

RBP-16 Rod Bolt Protectors 16-PACK

RBP-16 Rod Bolt Protectors 16-PACK Review

RBP-16 Rod Bolt Protectors 16-PACK Feature

• Re-usable plastic boots protect crank journals and rod bolts during installation.

RBP-16 Rod Bolt Protectors 16-PACK Overview

RBP-16 Rod Bolt Protectors 16 Re-usable plastic boots protect crank journals and rod bolts during installation. 104

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 07, 2011 20:06:19

Proform 67605 GM LS Engine Valve Spring Compressor

Proform 67605 GM LS Engine Valve Spring Compressor Review

Proform 67605 GM LS Engine Valve Spring Compressor Overview

   Proform #67605 Valve Spring Compressor, Steel, Bolt Down Mount, for GM LS Engines, Each.  P75-67605   Description:This new LS1-LS6 valve spring compression tool from Proform Parts is the perfect example. It isn't fancy, but can cut valve spring removal and replacement time to under 1-hour. It will work on any LS engine in a Camaro, Firebird, Corvette or truck. And, it's guaranteed to get the job done as easy, if not easier, than expensive compression tools. This LS valve spring compressor is compact, is activated with normal hand tools and takes up almost no space in your toolbox.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 06, 2011 15:51:22

OTC 1340 0.070" Diameter Convertible Straight Retaining Ring Plier

OTC 1340 0.070" Diameter Convertible Straight Retaining Ring Plier Review

OTC 1340 0.070" Diameter Convertible Straight Retaining Ring Plier Feature

• The bore of the shaft diameter range 15/16" to 1-7/16" with the size range of 93 to 143: 5/16" to 3/4" with the size range of 31 to 75 for the following ring series: 5100, 5101, 5102, 5555
• The bore of the shaft diameter range 1-1/16" to 2" for the following ring series: 5108 with the size range of 106 to 200
• The bore of the shaft diameter range 1-1/16" to 1-3/4" for the following ring series: N5000, N5001, N5002 with the size range of 106 to 175
• The bore of the shaft diameter range 1-7/16" to 2" for the following ring series: 5008 with the size range of 143 to 200
• Durable construction

OTC 1340 0.070" Diameter Convertible Straight Retaining Ring Plier Overview

There is such a wide variety of retaining pliers available individually or in sets, to handle many applications. These particular pliers are convertible. They have several ring series, bore of shaft diameter and size range that they fit.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 05, 2011 01:24:23

OTC 4731 Honda/Acura Crankshaft Damper Holding Tool

OTC 4731 Honda/Acura Crankshaft Damper Holding Tool Review

OTC 4731 Honda/Acura Crankshaft Damper Holding Tool Feature

• 1 yr warranty on material and workmanship

OTC 4731 Honda/Acura Crankshaft Damper Holding Tool Overview

• Tool allows the technician to hold the crankshaft damper when tightening or loosening the crankshaft bolt
• 50mm hex on holding tool

Works on the following Honda and Acura engines: 1990– -1997 Honda Accord 2.2L 4 cyl. - 1996– -1997 Honda Accord 2.7L V-6 - 1998– -newer Honda Accord 2.3L 4 cyl. & 3.0L V-6 - 1992– -newer Honda Civic 1.6L 4 cyl. - 1997– -newer Honda CR-V 2.0L 4 cyl. - 1993– -1997 Honda Del Sol 1.6L 4 cyl. - 2000– -newer Honda Insight 1.0L 3 cyl. - 1995– -1997 Honda Odyssey 2.2L 4 cyl. - 1998 Honda Odyssey 2.3L 4 cyl. - 1999– -newer Honda Odyssey 3.5L V-6 - 1992– -newer Honda Prelude 2.2L 4 cyl. - 1992– -1996 Honda Prelude 2.3L 4 cyl. - 2000– -newer Honda S2000 2.0L 4 cyl. - 1997 Acura CL 2.2L 4 cyl. - 1997– -1998 Acura CL 3.0L V-6 - 1998– -1999 Acura CL 2.3L 4 cyl. - 2000– -newer Acura CL 3.2L V-6 - 1990– -1992 Acura Integra 1.6L 4 cyl. - 1992– -1993 Acura Integra 1.7L 4 cyl. - 1993– -newer Acura Integra 1.8L 4 cyl. - 1991– -1995 Acura Legend 3.2L V-6 - 1996– -newer Acura RL 3.5L V-6 - 1995– -newer Acura TL 3.2L V-6.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 04, 2011 00:51:19

OTC 6930 Flange Type Puller

OTC 6930 Flange Type Puller Review

OTC 6930 Flange Type Puller Feature

• Sold Individually

OTC 6930 Flange Type Puller Overview

Pulls harmonic balancers, timing gears and parts having two or three tapped holes. Slotted holes in puller body permit cap screws to be positioned to handle bolt circle diameter from 1/2" to 4-5/8". Reach of puller is 4-1/4". Includes 3 cap screws 3/8"-24 x 3", and 3 cap screws 3/8"-16 x 3".

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Aug 02, 2011 15:42:31